Equipment name and model

The HLT-2000 front headlight tester contains:

Aluminum gantry (or ground rail-commercial vehicle)

Gathering light box (including CCD camera, Fresnel lens and button)
Electrical control cabinet (including PLC, servo driver, industrial computer, etc.)
Lighting online measurement software IA-HLT (for online adjustment in automobile factories)
Operation prompt display
Standard light source (for calibration)
Semi-electric screwdriver (optional)
10 m whiteboard (optional)
Complete technical data, including Chinese and English version of data book (including electrical circuit diagram, operation manual, installation manual, etc.).

Detection principle

The system achieves precise alignment of the light-collecting box with high beams, low beams, and fog lights through servo-driven positioning. An industrial CCD camera inside the box precisely controls exposure parameters to capture light pattern images. These images are transmitted to an industrial computer via GigE protocol at 20-40Hz frame rate. IYASAKA proprietary online light measurement software then analyzes the light patterns and intensity, completing tests for luminous intensity and positional offset measurements.

surveillance project

Left/right front headlights far light, near light and fog light position offset;

Left/right front headlights far light, low light and fog lamp luminous intensity;
Test of front lamp height;

Measurable light type

Halogen lamp, HID xenon lamp, LED lamp, matrix headlights, DLP headlights, laser headlights and four axis lights

ECE European light type, SAE American light type, JPN Japanese light type
It can be used for detection of common near light distribution such as L-shaped and Z-shaped

essential parameter

Test height (gantry)	250～1200mm
Test height (ground track)	300～1200mm
Test distance (distance from light box to car lamp)	3 00～7 0 0mm
Mobile speed of light boxes	Level Y: 250mm/s Vertical Z: 150mm/s

Range and precision

Measurement range and accuracy
project	scope	accuracy
Headlight luminance	0～ 120,000 cd	±5%
Optical axis shift (far/near/fog) Horizontal and vertical directions Vertical Z direction	-500mm/10m ～ 500mm/10m -500mm/10m ～ 500mm/10m	± 1.5cm / 10m or ±5.8 ± 1.5cm / 10m or ± 5.8
Light box positioning	Y：-1300～ 1300mm Z： 300～ 1200mm	±1mm ±1mm

Check the beat

Less than 50 seconds (no adjustment required).

Headlight tester——HLT-2000

Front headlight tester —— HLT-2000Head l ight Test---HL T-200Place of origin: ChinaManufacturing company: IYASAKA Equipment name and modelThe HLT-2000 front headlight tester contains:Aluminum gantry (or ground rail-commercial vehicle)Gathering light box (including CCD camera, Fresnel lens and button)Electrical control cabinet (including PLC, servo driver, industrial computer, etc.)Lighting online measurement software IA-HLT (for online adjustment in automobile factories)Operation prompt displayStandard light source (for calibration)Semi-electric screwdriver (optional)10 m whiteboard (optional)Complete technical data, including Chinese and English version of data book (including electrical circuit diagram, operation manual, installation manual, etc.).Detection principleThe system achieves precise alignment of the light-collecting box with high beams, low beams, and fog lights through servo-driven positioning. An industrial CCD camera inside the box precisely controls exposure parameters to capture light pattern images. These images are transmitted to an industrial computer via GigE protocol at 20-40Hz frame rate. MiRongs proprietary online light measurement software then analyzes the light patterns and intensity, completing tests for luminous intensity and positional offset measurements.surveillance projectLeft/right front headlights far light, near light and fog light position offset;Left/right front headlights far light, low light and fog lamp luminous intensity;Test of front lamp height;Measurable light typeHalogen lamp, HID xenon lamp, LED lamp, matrix headlights, DLP headlights, laser headlights and four axis lightsECE European light type, SAE American light type, JPN Japanese light typeIt can be used for detection of common near light distribution such as L-shaped and Z-shapedessential parameterTest height (gantry)250～1200mmTest height (ground track)300～1200mmTest distance (distance from light box to car lamp)3 00～7 0 0mmMobile speed of light boxesLevel Y: 250mm/sVertical Z: 150mm/sRange and precisionMeasurement range and accuracyprojectscopeaccuracyHeadlight luminance0～ 120,000 cd±5%Optical axis shift (far/near/fog)Horizontal and vertical directionsVertical Z direction-500mm/10m ～ 500mm/10m-500mm/10m ～ 500mm/10m± 1.5cm / 10m or ±5.8± 1.5cm / 10m or ± 5.8 Light box positioningY：-1300～ 1300mm Z： 300～ 1200mm ±1mm±1mmCheck the beatLess than 50 seconds (no adjustment required).

sales@iyasaka.cn

010-58732955